How to: 3d printing

From MDD wiki
Revision as of 15:42, 7 December 2022 by Xiduzo (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Handy links
Reserve things in the Makers Lab (TTH ground floor) https://www.supersaas.co.uk/schedule/makerslab/Makerslab_reserveren

Prepare your 3D model for printing

3D printing is mostly 2D printing over and over again. In order to print your 3D object, we need to "slice" a 3D object into 2D layers.

In order to do this, we are using a tool called Prusa slicer (https://www.prusa3d.com/prusaslicer/)

Basic slicer knowledge

The three most important aspects of 3D printing are:

  1. The filament
  2. The infill
  3. The layer height

Filament

The filament is the type of plastic you are printing. As with all materials, different types of plastics have different properties.

Properties can be color, elasticity, sturdiness, etc.


For printing, the most important thing about each filament is the plastic it's melting point. All the filament holders should have a sticker on their side saying:

  1. The type of filament it is
  2. The ideal printing temperature.


Infill

The infill will be expressed as a percentage. The higher this percentage will be, the stronger your 3D model will be but the more time it will take to print.

However, generally speaking, 10-20% of infill should be fine for basic models.

Layer height

The layer height will be expressed as millimetres. This will tell the software how many millimetres each "slice" will be. The lower this number will be, the finer the details of your 3D model will be but the more time it will take to print.

Printing your print

At the HvA we have a makers lab in the ground floor of the Theo Thijssen Huis (TTH). This is the place where you can print your 3D models and they can help you set-up your prints.

3D printing troubleshooting

For an in depth guide of the most common printing issues have a look at https://www.simplify3d.com/support/print-quality-troubleshooting/